Dining Flys
Stay out of the sun and weather
Every Spring Valley Lodges Dining Fly is manufactured with full ridge reinforcements, all four corners reinforced, and all edges double-rolled for neat appearance and strength. Each corner has a heavy cotton webbing loop sewn into a reinforcement and loops are sewn on each seam for additional strength. Both ends of the ridge reinforcement have double ties, enabling you to tie to your ridge pole. Wind loops are also attached to both ends of the ridge. We offer Dining Flys to match the roof line of your tent for a neat uniform fit. (These are called Matching Dining Flys.) The standard Dining Fly is manufactured to a dimensional size.
*Scroll down to the bottom to see tent sizing, prices, and options*
Here is what you get with a Spring Valley Lodges Dining Fly:
-
Full ridge reinforcement
-
All four sides double-rolled
-
Double 24” ridge ties on seams and wind loops at both ends of ridge
-
Four corner reinforcements with heavy cotton loops
-
Loops located at each seam for strength
-
Care sheet explaining how to care for the fabric
​
Example
A 10’x10’ Standard Dining Fly would measure 10’ square as it lays on the ground, while a Matching Dining Fly for a 10’ wide wall tent would measure larger from side-to-side and be 10’ deep front-to-back.
​
Note~ All PRODUCTS ARE “CANVAS ONLY”. YOU WILL NEED POLES, ROPES, AND STAKES TO SET UP YOUR FLY.
